2.2. LCD Menu Configuration
User can set the following configurations by LCD keypad.
Note:
1. Press TRANSFER before input data can switch characters to be capital or
lowercase.
2. Press SPEED before input data can switch input mode as character mode or digit
mode; for example, user wants to enter IP address, after pressing SPEED can
enter digits directly.
3. When user is inputting data, press C will jump out to menu list, press Í will clear
previous input data.
1. Call List (**)
If there is an unanswered IP call, it will be kept in message box. MESSAGE LED will be
flashing until user press MESSAGE to check miss call and re-press MESSAGE to return to
main screen.
Missed Calls：to see all missed calls in message box.
Received Calls：to see all received calls in message box.
Dialed calls: to see all dialed calls in message box.
2. Forward Type (**)
There are 3 selections in Forward type, user must select under which condition to forward
calls.
1. Busy
When IP-Phone is in busy status, the incoming call will be forwarded to the assigned
phone number.
A. Activate
Enter a forwarded phone number to activate busy forward function.
B. Deactivate
Deactivate Busy Forward function.
2. No Response
When IP-Phone hasn’t been picked up for around 10 seconds, the incoming call will
be forwarded to the assigned phone number.
A. Activate
14
To Next Page
Loading...