MicroNet SP676C - Configuration; System

3.3 Configuration
Eleven functions, including System, Port, VLAN, Aggregation Configuration, Quality of
Service, Mirror, Rate Limit, SNMP and Discover is contained in this function folder for
system and network management. Each of them will be described in detail orderly in the
following sections.
10
Configuration
S
ys
t
em
P
or
t
VLAN
A
ggrega
ti
on
Q
ua
lit
y o
f
S
erv
i
ce
Mi
rro
r
R
a
t
e
Li
m
it
SNMP
Di
scove
r
3.3.1 System
System configuration is one of the most important configurations in the switch.
Without the proper setting, network manager will not be able to manage or view the
device. The switch supports manual IP address setting. After applying a new IP
address, a new login page will be started automatically. Please login again to
proceed to other configurations.