LACP
This switch supports both static trunking and dynamic Link Aggregation Control
Protocol (LACP).
LACP configured ports can automatically negotiate a trunked link with
LACP-configured ports on another device. You can configure any number of ports on
the switch as LACP, as long as they are not already configured as part of a static
trunk. If ports on another device are also configured as LACP, the switch and the
other device will negotiate a trunk link between them.
In this page, you can make the protocol enabled or not, and configure the key value
that is current administrative value of the Key for the protocol partner.
The key
n
umber is between 1 - 255. Auto means auto generated key
To Next Page
Loading...
Need help?
General
