D5CUB System Board Manual54
Section 4: The BIOS Setup Utility
Save and Exit Setup
This selection saves the changes you have made in the
setup program, then exits and reboots the system. After
making all modifications in the setup program, exit to
the main menu screen. Highlight the SAVE AND EXIT
SETUP option and press <Enter>. Press <Y> to
confirm the changes made and <N> or <ESC> if
additional modifications are needed before exiting the
setup program.
Exit Without Saving
This selection abandons all previous settings, then exits
and reboots the system. From the main menu screen
highlight the EXIT WITHOUT SAVING option and
press <Enter>. Press <Y> and the system will exit the
setup program, then reboot without saving any of the
changes made.
To Next Page
Loading...
Need help?
General