D5CUB System Board Manual
Section 1: Quick Installation
9
1
Section
Quick Installation
We know that many experienced people prefer to read as
little of the documentation as possible. If this sounds like
you, here’s the short form to get up and running quickly.
Installing the D5CUB
1. Make backup copies of your installation and configu-
ration diskettes.
2. Ground yourself to prevent damaging static dis-
charge by using an anti-static wrist or ankle strap, or
touch a safely grounded metal object.
3. Remove the D5CUB from its packaging.
4. Configure and verify the system board’s jumper set-
tings (refer to Jumper Settings in Section 2).
5. Install the CPU and the system memory.
6. Install the system board in the chassis and make all
necessary case connections.
7. Install any ISA and PCI add-on peripherals.
8. Connect any optional devices.
9. Turn the computer on and press the <DEL> key
when you see the screen shown in Figure 1.1.