Need help?Do you have a question about the Micropack FDS301 and is the answer not in the manual?
General| Brand | Micropack |
|---|---|
| Model | FDS301 |
| Category | Measuring Instruments |
| Language | English |
Details the key features and benefits of the FDS301 visual flame detector.
Explains the visual flame detection technology and its capabilities.
Outlines critical safety warnings for installation and operation.
Provides cautionary advice for using the equipment.
Lists specific limitations regarding the detector's use under EN54 standards.
General important safety information and disclaimers.
Describes the detector enclosure and its certification for hazardous areas.
Details how to mount and orient the detector for optimal performance.
Step-by-step guide for wiring the detector.
Mechanical aspects of installation, including mounting and sealing.
Electrical considerations for installation, EMC compliance, and cabling.
Guidelines for proper earthing and cable screening for system integrity.
Specifies requirements and considerations for the detector's power supply.
Details how to implement RS485 communication with the detector.
Information on DC power cable selection and maximum lengths.
Cable characteristics recommended for video output.
Cable characteristics recommended for RS485 communication.
Guidelines for optimal detector placement to ensure coverage and avoid false alarms.
Explains the detector's field of view and coverage capabilities.
Discusses potential interference from flare radiation.
Factors that can cause optical contamination and how to mitigate them.
Recommendations for mounting detectors in enclosed spaces.
Information on the detector's sensitivity to different fire types and conditions.
General procedure for maintenance and commissioning of the detector.
How to perform functional tests on the detector using a simulator.
Steps for safely removing the detector's electronic module.
Procedure for installing a new electronic module.
Best practices for diagnosing faults within the detector.
Explanation of the status LED colours and their meanings.
Diagnostic chart for identifying and resolving power supply faults.
Troubleshooting issues related to live video image quality.
Detailed electrical parameters, power supply, and communication specifications.
Physical dimensions, material, and ingress protection details.
Operating and storage temperature and humidity limits.
To Next Page