Chapter 2 FrontRunner™
2-48 Visionscape FrontRunner™ User’s Manual v4.1.3, April 2012
Changing a Camera’s Name
Note: You will need the user name and password for the camera whose
name you want to change.
From the Network Overview window, you can change the name of the
Smart Camera over Ethernet without a serial connection and
HyperTerminal. This change is dynamic and does not require you to
reboot the Smart Camera.
Use the following procedure to change the camera name:
1. Select View > Network Overview.
FrontRunner™ displays the Network Overview window.
2. Click on the name of the camera whose name you want to change.
FrontRunner™ displays the Change Network Settings button.
To Next Page
Loading...
