Windows You’ll See In FrontRunner™
FrontRunner™
2
v4.1.3, April 2012 Visionscape FrontRunner™ User’s Manual 2-47
– VS-1 Smart Camera high resolution
– VS-1 Smart Camera standard resolution with IntelliFind™
– VS-1 Smart Camera high resolution with IntelliFind™
• Name — The name of the Smart Camera
• IP Address — The IP address of the Smart Camera
• DHCP — Is either of the following:
– Y — The Smart Camera is using dynamic IP addressing
– N — The Smart Camera is using static IP addressing
• Status — The status of the Smart Camera
• Controller — The IP address of the PC that is controlling the Smart
Camera
• Job — The name of the Job that is loaded on the Smart Camera
Note: For the Job name to be displayed in the Network Overview
window, you must first save the Job to disk, then download it to the
Smart Camera.
• Cycles — The total number of cycles
• Passed — The number of cycles that passed
• Failed — The number of cycles that failed
• Alarms — The total number of alarms
• Connections — The number of connections to the Smart Camera
• SW Version — The version of the software running on the Smart
Camera
• Subnet Mask — The subnet mask of the Smart Camera
• MAC Address — The MAC address of the Smart Camera
To Next Page
