Miscellaneous
FrontRunner™
2
v4.1.3, April 2012 Visionscape FrontRunner™ User’s Manual 2-65
FIGURE 2–30. Configure I/O Buttons
• Add New — When clicked, adds a new IO button.
• Remove — When clicked, removes an existing IO button
• Type — Is one of the following:
– Virtual — Allows you to generate IO data using software.
– Physical — Allows you to generate IO data using hardware.
– Separator — Allows you to group IO data.
• IO Point — Is a number from 1 to 2048.
• Trigger Interval — Is a number from 1 to 9999.
To Next Page
Loading...
