Chapter 2 FrontRunner™
2-64 Visionscape FrontRunner™ User’s Manual v4.1.3, April 2012
Miscellaneous
Displaying Important Information About a Camera
To display the important information about a Smart Camera, simply hover
the mouse pointer over the camera button. Information includes:
• Type of Smart Camera
• IP address of PC controlling the camera
• Name of currently loaded Job
• Date currently loaded Job was created or modified
• Name of PC controlling camera
• IP address and MAC address of the camera
• Version of software on the camera
Configuring I/O Buttons
After a Job has been downloaded to the device, and the device is in Run
mode, you can configure I/O buttons, as shown in Figure 2–30.
To Next Page
