MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
208
show port
Syntax:
show port
Description:
To display the port information of STP.
Argument:
None.
Possible value:
None.
Example:
MICROSENS# stp
MICROSENS(stp)# show port
Port Port Status Path Cost Priority Admin Edge Port Admin Point To Point
========================================================================
1 DISCARDING 2000000 128 No Auto
2 DISCARDING 2000000 128 No Auto
3 DISCARDING 2000000 128 No Auto
4 DISCARDING 2000000 128 No Auto
5 DISCARDING 2000000 128 No Auto
6 DISCARDING 2000000 128 No Auto
7 DISCARDING 2000000 128 No Auto
8 DISCARDING 2000000 128 No Auto
To Next Page
