Microsens MS453522M - Page 214

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
209
show status
Syntax:
show status
Description:
To display the status of STP.
Argument:
None.
Possible value:
None.
Example:
MICROSENS(stp)# show status
STP Status :
STP State : Enabled
Bridge ID : 00:60:A7:D8:09:1D
Bridge Priority : 61440
Designated Root : 00:60:A7:D8:09:1D
Designated Priority : 61440
Root Port : 0
Root Path Cost : 0
Current Max. Age(sec) : 20
Current Forward Delay(sec) : 15
Hello Time(sec) : 2
STP Topology Change Count : 0
Time Since Last Topology Change(sec) : 848