Microsens MS453522M - Page 215

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
210
 system
set contact
Syntax:
set contact <contact string>
Description:
To set the contact description of the switch.
Argument:
<contact>:string length up to 40 characters.
Possible value:
<contact>: A, b, c, d, ... ,z and 1, 2, 3, …. etc.
Example:
MICROSENS(system)# set contact Berlin
set device-name
Syntax:
set device-name <device-name string>
Description:
To set the device name description of the switch.
Argument:
<device-name>: string length up to 40 characters.
Possible value:
<device-name>: A, b, c, d, ... ,z and 1, 2, 3, …. etc.
Example:
MICROSENS(system)# set device-name CR-2600
set location
Syntax:
set location <location string>
Description:
To set the location description of the switch.
Argument:
<location>: string length up to 40 characters.
Possible value:
<location>: A, b, c, d, ... ,z and 1, 2, 3, …. etc.
Example:
MICROSENS(system)# set location Berlin