调高器说明书
Note:
1. Make sure the depth of bolts in
six mounting holes during
installation will not affect the
travel.
2. The length of each mounting
bolt beyond the shell of the height
controller interna llymust be less
than 8mm, i.
e., the bolt length
inserting into the interior of the
height controller shell must not
exceed 8mm.
Fig. 3-2 Mounting position of
screw holes in the back of the controller
The right view of the height controller and related installation dimensions are
shown in Fig. 3-3.
The back view of the height controller and related installation dimensions are
shown in Fig. 3-4.
10
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fine
print.com.cn
To Next Page
Loading...
