Microtest CT-8750 - System Function and Configuration; System Function Overview

CT-8750 User’s Guide
P 12
[File] File Management
[Stat] Display the statistic information
[Mode] Test Mode Setup
[Cond] Conductance Test Setup
[RLC] Resistance/Inductance/Capacitance/Diode Test Setup
[H.V.] High Voltage Setup
I.6.C
EditKey Group
Alphanumeric key Use for key in alphanumeric, including 0~1 and A~Z,．/
[BS] () Back Space
Cursor Keys Use to move cursors, including[←] [→] [↑] [↓]
And [PgUp] [PgDn]
[Exit] Exit from current status/screen
I.6.D
[Enter] Confirmation
I.6.E
[TEST] To start test
I.6.F
[Reset] System will be re-started when pressed to perform the
warm start.
I.6.G
SoftKey Group
S1~S6 keys are located on the right side of LCD display and correspond for the
auxiliary setup/activate/switch function.