(c) Use [↑] or[↓] to select the item needed
(d) Complete setup, press [Exit] to leave
High limit use number key to enter value, the limit is 0~50Ω
Low limit use number key to enter value, the limit is 0~50Ω
Test Speed Press S1[PROG] to shift speed as FAST/LOWER/FMID/AUTO
When setting is AUTO, the system will automatically select
fastest and steadiest test speed to progress
Int. Limit Spec Use numeric key to enter value, the limit is ±50Ω
This function provides the repeatedly test at one DUT
Int. Stop Mode Use S1 [PROG] to change mode be AUTO/TIMER
AUTO: System will test repeated until DUT cable
completely take off then automatic stop
TIMER: Follow test time to do test
Int. timer Use alphanumeric key to setup second, the limit is 0~99,
Howeve r, when the Int. stop mode setting is auto, this function will not
work.
To Next Page
Loading...
