Need help?Do you have a question about the Microtest CT-8750 and is the answer not in the manual?
Explains 4-wire and 2-wire measurement concepts and wiring maps.
Describes the self-test routine for the instrument's components.
Outlines the procedures for instrument calibration.
Configures settings related to the test environment.
Configures a system password to protect settings from modification.
Guides on executing sequence tests after setup.
General| Advanced Functions | 4-Wire Measurement Programmable Sequential Test Auto Pin Search Self Diagnostic / Self Calibration |
|---|---|
| Scanning Mode | Auto/Short Switchable |
| Test Single Information | Output Rating: 5Vdc DC Hiport / Insulation 50~1000Vdc/50~1000Vac(/FA) 50V Resolution ±1% Accuracy |
| Accessory | Remote Control Cable (Optional) RS-232 Cable (Optional) Power Cord User's Guide |
| Ordering Information CT-8750 /64P /128P /256P | 4- Wire Universal Cable / Harness Tester 64 Test Points 128 Test Points 256 Test Points |
| Display and Sound | 320 x 240 Graphic LCD Display Pass/Fail LED Indicator/LCD Display Internal Speaker |
| Connections | 64 Test Points 128 Test Points (Optional) Hipot Calibration +/- Output Auto Pin Search Jack |
| I/O Interface | RS-232 Port Printer Port Remote Control Port |
| Cable Capacitance Limit | 1µF Max. |
| Front Panel Control Buttons | Syskey / Fastkey / Editkey |
| Memory | 56 Setup Files Max. 120 Setup Files (Optional) |
| Power Supply | 115/230Vac ± 10% Switchable 60/50Hz |
| Temperature & Humidity | 15ºC~35ºC RH≦75% |
Weight and Dimensions| Dimension (WxHxD) | 425 x 190 x 350mm |
|---|---|
| Weight | Approx, 15kgs (w/o Accessory) |
To Next Page
