Midea CCM-270A/WS

1 CCM-270A/WS
201807 117
Functions
Machine Code: This setting is to activate the “ECS” function for the CCM-270A/WS device. On clicking the slider, the
following below shown dialog box would get opened. The subsequent QR code needs to be sent to Midea Technical
Support Engineer for the activation of the function.
No
Function
1
It shows the current version of the software of CCM-270A/WS gateway device.
2
It is used to update the software of CCM-270A/WS. This function is not available for the CCM-270A/WS website