1 CCM-270A/WS
201807 59
4.2 Indoor Unit View- Group
This function shows the various indoor units which are present in the groups created by the user. The group creation is
available in the “Install” tab functions. Along with the created groups, also is present a default “Ungrouped” where all the
indoor units which have not been assigned to any group are present. The user can transfer the units from “Ungrouped”
section to the various “Group” using the “Install” tab to edit the groups.
Once a group is selected, all the indoor units present in that group are displayed on the right. The top right menu, gives the
option to sort the units according to name or mode.
The top left corner shows the number of indoor units in the group.
4.2.1 General Controls of Indoor Unit
You can click on and indoor unit icon and it will get selected. There will be a “tick” on the top right side of the indoor
unit. This sign on the top right of the indoor unit icon means the corresponding unit is selected to control. You can tap on
multiple units with a single click of mouse and all these units will be selected for controlling at the same time. At the top
left corner, you would see “All”, “Control” and “Cancel”.
To Next Page
Loading...
Need help?
General
