Midea CCM-270A/WS

1 CCM-270A/WS
201807 61
Functions
Non-Auto Mode Display
Auto Mode Display
Icon
Description
It is to switch ON or OFF the indoor unit.
It is to select the operating mode for the indoor unit.
It is to set the temperature for the indoor unit, two
set points are available in the Auto Mode and only
one set point is available in Non- Auto Mode.
It is to change the swing of the indoor unit.
It is to change the fan speed for the indoor unit.
“Apply”: It will save the adjusted settings.
“Cancel”: All the adjusted settings would be lost and
indoor unit would run according to previous settings.