17.4 Diagnosis and Solution
17.4.1 EEPROM parameter error diagnosis and solution (E0/F4)
Indoor or outdoor PCB main chip does not receive feedback
from EEPROM chip.
● Installation mistake
● Faulty PCB
Trouble shooting:
Yes
Replace the indoor/outdoor
main PCB.
Power off, then restart the
unit 2 minutes later. Does
a problem still remain?
EEPROM: a type of read-only memory. The contents can be erased and reprogrammed using a
pulsed voltage. To locate the EEPROM chip,
Note: The two photos above are only for reference purposes only. The design of the devices
depicted may vary by model.
To Next Page
Loading...