Midea MHC-V16W/D2RN8-B - Failed Connection; Successful Connection

M thermal Mono
202005 105
Part 3 - Installation and Field Settings
After the appliance is successfully connected, the LCD icon “ ” of the wired controller is constantly on, and the unit can
be controlled through the APP.
If the network distribution process fails, or the mobile connection demands reconnection and replacement, operate
“RESTORE WLAN SETTING” on the wired controller, and then repeat the above process.
Figure 3-8.6: successful connection
Figure 3-8.7: failed connection
Midea CAC Confidential