Midea SO-BD386WE-UT - 8 Dismantling of Parts; Parts on the Door; Parts Inside the Refrigerator; Light System

Service manual, 2016-12
21 / 42
8. Dismantling of parts
8.1 Parts on the door
Door seal
Door seal is installed into door liner groove.
1） Open the refrigerator door;
2） Take the door seal ①out of door liner;
Door tray
Lift up the bottle frame and take it out from the door
liner of the refrigerator.
rollover beam
None
8.2Parts inside the refrigerator
Shelves
1） Pull out the partition plate completely.
2） Lift it up and take it out from the refrigerator.
Ice tray
None
Refrigerator tray
None
Drawer
None
8.3Light system
Light