Midea SO-BD386WE-UT - Page 25

Service manual, 2016-12
25 / 42
anti-condensation piperight condenseroutlet of
anti-condensation pipedry filterSuction pipe assembly
transition pipeleft condenseranti-condensation
pipedischarge and evaporating pipe
Starter and protector of the compressor
1. Remove the screws
1） Two screws outside
2） One screw inside
2. Remove the clipping strip
Slowly pull it out
3. Remove the protective cover
1）Pry the protective cover slowly from the upper part,
2）Pull it out and remove it.