Midea UR-BD240WE-ST

Service Manual_2020-V1.0
42
Select to enter
into forced
cooling mode
Enter into test mode and press button
A for the first time
Gear ⑥⑤④ together lighten, then the
compressor and the fan will start
working
In forced cooling mode, if no button is
pressed within 36 hours,
then the refrigerator will exit the test
mode and return to normal operation
mode
Select to enter
into forced
defrosting mode
Enter into test mode and press button
A for the second time
Gear ④③② together lighten, then the
compressor and fan will stop working,
the defrost heater starts to work.
In forced defrosting mode, when the
freezing defrosting sensor reach a
temperature of 8℃ and the defrosting
heater has been working for at least 2
minutes.
then the refrigerator will exit the test
mode and return to normal operation
mode
In forced defrosting mode, if the
defrosting heater has been working for
60 minutes,
then the refrigerator will exit the test
mode and return to normal operation
mode
Select to exit
the test mode
Enter into test mode and press button
A for the second time
The refrigerator will exit the test mode
and return to normal operation mode.
9.8 Demo mode（None）
9.9 Backup data for power fail
1) The running state of the refrigerator is remembered after compressor running for 1 hour
continuously.
2) The running state of the refrigerator is remembered after change function settings and lock.
3) When the refrigerator is out of power and recharged, the running state of the refrigerator is same as
before.