Midland P25 - Changing TX Power; Caller ID

21
www.midlandradio.com
Version 5.1
680-090-2042
19. CHANGING TX POWER
Press SHIFT+2 to select High or Low TX power. Indicates high power.
If the radio is programmed for Hi power, the radio can be changed to low power
with this function. If the radio is programmed for low power, it cannot be switched
to HI power with this function.
The Figure-37 Displays the Hi power symbol.
RX
TX
C001 TAC 2 MD⌧N
GPC 00001
Figure 37
20. CALLER ID
In Simplex mode the Midland Base Tech III display indicates the source Unit ID or
Individual ID.
Figure-38 Displays the source ID as 00000366 in group call mode.
Figure-39 Displays the source ID in Individual Call mode.
RX
TX
C001 TAC 2 MD⌧N
CAL 00000366 (GPC)
Figure 38
RX
TX
C001 TAC 2 MD⌧N
CAL 00000366 (IDC)
Figure 39