Midland P25 - DSP Error Detection

32
www.midlandradio.com
Version 5.1
680-090-2042
35. DSP ERROR DETECTION
When there is a problem with the DSP, the following message may be shown
on the display. Please check that the DSP board is installed correctly, and the
correct firmware version is displayed at startup.
Figure-65 shows DSP failure
Figure-66 shows DSP not ready
Figure-67 shows DSP serial error
RX
TX
C001 MD⌧N
DSP Failure
Figure 65
RX
TX
C001 MD⌧N
DSP Not Ready
Figure 66
RX
TX
C001 MD⌧N
DSP Serial Error
Figure 67