GRX-3000
Midtronics bv. Lage Dijk-Noord 6 IJsselstein NL
www.midtronics.com
26
Chapter 9: Utility Menu
Display
The DISPLAY option allows you to adjust the contrast of the text on the display.
Contrast Level
The contrast level is 0 (lightest) to 10 (darkest). To change it:
1. Press the UP () or DOWN () ARROW key to change the contrast.
9 (1-10)
2. Press the SAVE soft key to save your setting or the BACK soft key to return to the menu without saving the changes.
Problems with the Display
The display does not turn on
• MakesurethatthepowercordispluggedinandtheON/OFF switch is set to ON.
The display is dim
• ThecontrastmayneedtobeadjustedintheUTILITY Menu. Highlight the DISPLAY icon and press ENTER. Use the UP
() or DOWN () ARROW key to change the contrast.
Update
As software updates become available you’ll be able to use this utility to update the charger software using les on an SD
card. The use of a special formatted disk is required for this action.
The software needs to be placed on the SD card and the card needs to be inserted in the dedicated slot.
When nished the charger will prompt you to remove the card and reboot.
Format Card
Select this utility to format a data card to receive data or erase all data on the card. The charger will warn you before
formatting the disk and ask you if you want to continue. When a new blank data card is used you always have to use this
function before the tester can write to the card.
Language
The LANGUAGE utility enables you to select a language for the display and printouts. You can select one of the 24 available
languages.
1. Press the UP () or DOWN () ARROW key, or use the numeric keys to select your language.
2. Press SAVE to save your setting.
If you use the alphanumeric keypad to enter the number preceding the option button, no additional keypress is needed to
save your selection.
Coupon
The COUPON utility enables and disables the printing of the custom coupon you’ve created in the EDIT COUPON utility.
1. Press the UP () or DOWN () ARROW key, or use the numeric keys to select your choice
2. If you selected the USER COUPON mode you can enter your text on 8 lines.
Use the UP (), DOWN (), LEFT () or RIGHT () ARROW to navigate through the available space. Select the character
by pressing the key associated with the character as many times as needed.
Press SAVE to store the text.
To Next Page
Loading...
Need help?
General
