• 51 •
• Direct sunlight interferes with infrared data transmission and receiving. If the printer is
not receiving data, remove the printer and EXP from direct sunlight. If the printed charac-
ters are not clear or are partially missing, recharge the battery and reprint.
• If you are unable to print after ensuring the analyzer is functioning, the printer is on, the
batteries are good, and the IR transmitter and receiver are aligned, check the printer
manual for further instructions or call Midtronics at 800-776-1995 for assistance. (See
“Patents, Limited Warranty, Service” for more information.)
Chapter 13: Troubleshooting
To Next Page
Loading...
Need help?
General
