Cleaning and care
53
Danger of burning and scalding
on hot components or by hot liquids.
Components can become very hot
during operation. Touching hot
components can cause burning. The
liquids and steam dispensed are very
hot and can cause scalding.
Keep away from the area underneath
the dispensers when hot liquids and
steam are being dispensed.
Always allow the coffee machine to
cool down before cleaning it.
Please be aware that water in the
drip tray can also be very hot.
Risk of damage due to moisture
ingress.
The steam from a steam cleaning
appliance could reach electrical
components and cause a short
circuit.
Do not use a steam cleaner to clean
the coffee machine.
It is important to clean the appliance
regularly. Milk residues can go off and
can block the milk pipe.
Unsuitable cleaning agents
Contact with unsuitable cleaning
agents can alter or discolor all
surfaces. All surfaces are susceptible
to scratching. Scratches on glass
can in some circumstances lead to
breakage.
Remove any residual cleaning agent
immediately. Make sure you remove
any spillages or splashes of
descaling agent immediately.
To avoid damaging the surfaces of your
appliance, do not use:
- Cleaning agents containing soda,
ammonia, acids, or chlorides
- Solvent-based cleaning agents
- Cleaning agents containing descaling
agents (unsuitable for cleaning the
front of the machine)
- Stainless steel cleaning agents
- Dishwasher cleaners (unsuitable for
cleaning the front of the machine)
- Glass cleaners
- Cleaning agents for ceramic
cooktops
- Oven cleaners
- Abrasive cleaning agents, such as
scouring powder, scouring liquid, or
pumice stones
- Hard abrasive brushes or sponges,
such as pot scourers or sponges
which have been previously used
with abrasive cleaning agents
- Eraser sponges
- Sharp metal scrapers
- Steel wool or stainless steel wire
scourers
To Next Page
Loading...
Need help?
General
Weight and Dimensions
