Miele CVA 7445 User Manual

Cleaning and care
58
 Clean the area around the main
dispenser with a damp cloth.
Reassembling the main dispenser
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
Make sure that all parts are tightly
connected to one another.
 Reassemble the dispensing unit.
Press down firmly so that the spouts
become securely connected to the
holder.
 Insert the dispensing unit into the
coffee machine and connect the milk
pipework.
 Reinstall the stainless-steel cover.
 Close the appliance door.
Fit cover to main dispenser will appear in
the display.
 Confirm the message withOK.
Cleaning the cup-rim sensor
The cup-rim sensor is located under the
main dispenser.
Clean the cup-rim sensor at least once
a week and more often if heavily soiled.
 Press the two catches together (see
arrows).
The cup-rim sensor is released.
 The cup-rim sensor can be cleaned in
the dishwasher, or by hand using
warm water and a little liquid dish
soap.
 To reinstall the cup-rim sensor, press
it into the holder on the main
dispenser from below.

Miele CVA 7445 Specifications

General

Product type	-
Built-in grinder	Yes
Capacity in cups	1 cups
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Milk tank capacity	0.7 L
Appliance placement	Built-in
Water tank capacity	2.7 L
Coffee beans capacity	300 g
Reservoir for brewed coffee	Cup
Cord length	2 m
Control type	Touch
Product color	Black, Stainless steel
Housing material	Stainless steel
Used capsules container capacity	17 pc(s)
Current	10 A
Connected load	1500 W
AC input voltage	220–240 V
Programmable auto power off	No

Weight and Dimensions

Depth	475 mm
Width	595 mm
Height	455 mm
Installation compartment depth	550 mm
Installation compartment width	560 mm
Installation compartment height	448 mm