Miele CVA 7445 User Manual

Cleaning and care
59
Cleaning the milk flask with lid
The milk flask should be taken apart
and cleaned every day after use.
Both the lid and the glass flask can be
cleaned in the dishwasher, or by hand
using warm water and a little liquid dish
soap.
 Remove and empty the milk flask.
 Rinse the milk pipework in the lid
under running water and then place
the lid in the dishwasher.
 If no water runs out of the connecting
piece, clean it with the cleaning
brush.
 Clean the glass flask.
 Dry all parts and especially the
threads on the lid and on the glass
with a clean cloth. Reassemble the
milk flask.
 Clean the milk-flask holder on the
coffee machine with a damp cloth.
Cleaning the milk valve (daily)
The milk-valve seal can be damaged
by objects with sharp edges or
similar.
Do not use any sharp-edged objects
(such as knives) to clean the milk
valve.
The milk valve is located under the
bean container on the left-hand side.
If allowed to dry, milk residues can
become encrusted on the stainless-
steel bolt. These crusty deposits are
difficult remove. Therefore, it is
important to carry out regular cleaning
after preparing milk.

Miele CVA 7445 Specifications

General

Product type	-
Built-in grinder	Yes
Capacity in cups	1 cups
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Milk tank capacity	0.7 L
Appliance placement	Built-in
Water tank capacity	2.7 L
Coffee beans capacity	300 g
Reservoir for brewed coffee	Cup
Cord length	2 m
Control type	Touch
Product color	Black, Stainless steel
Housing material	Stainless steel
Used capsules container capacity	17 pc(s)
Current	10 A
Connected load	1500 W
AC input voltage	220–240 V
Programmable auto power off	No

Weight and Dimensions

Depth	475 mm
Width	595 mm
Height	455 mm
Installation compartment depth	550 mm
Installation compartment width	560 mm
Installation compartment height	448 mm