Installation
*INSTALLATION*
85
Electrical connection
Before connecting the coffee machine,
make sure that the connection data on
the data tag (voltage and frequency)
matches the domestic electrical supply.
This data must match to prevent the
coffee machine from being damaged. If
in any doubt, consult a qualified
electrician.
The necessary connection information
is given on the data tag inside your
appliance.
The fuse rating must be at least 15A.
If possible, the socket should remain
easily accessible. If the socket is no
longer accessible after installation, an
additional means of disconnection must
be provided for all poles.
Always attach plug to appliance first,
then plug cord into the wall outlet. To
disconnect, turn any control to “off,”
then remove plug from wall outlet.
Temporary or permanent operation on
an autonomous power supply system or
a power supply system that is not
synchronized with the grid power
supply (e.g., island networks, back-up
systems) is possible. A prerequisite for
operation is that the power supply
system complies with the specifications
of EN50160 or an equivalent standard.
The function and operation of the
protective measures provided in the
domestic electrical installation and in
this Miele product must also be
maintained in isolated operation or in
operation that is not synchronized with
the grid power supply, or these
measures must be replaced by
equivalent measures in the installation.
As described, for example, in the
current version of VDE-AR-E 2510-2.
The coffee machine must not be used
with energy saving plugs. These
reduce the energy supply to the
machine, which could generate
excessive heat.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
