Miele CVA 7445 User Manual

Cleaning and care
60
 Open the appliance door.
 Clean the milk valve with a damp
cloth/microfiber cloth.
 Close the appliance door.
Removing and cleaning the
milk valve (once a month)
If the following issues occur during milk
preparation, the milk valve may be
blocked: only hot milk is dispensed
instead of milk froth, the milk sprays
out. Clean the milk valve more often if
necessary.
The milk-valve cover should only be
cleaned by hand.
 Open the appliance door.
 Remove the bean container and
maintenance container on the left-
hand side.
 Remove the main dispenser’s
stainless-steel cover.
 Remove the milk-valve cover: press
on the recessed grip to unlock the
cover.
On the top right-hand side of the
cover, you will find a pin for swiveling
the cover out.
1
2
3
 Detach the milk pipework from the
dispensing unit on the main
dispenser and from the milk-valve
silicone seal( and).
 Remove the milk pipework
connecting the milk valve to the main
dispenser.
 Disconnect the angular molded hose
from the round hose. Rinse the hoses
thoroughly under running water.
Do not remove the connecting pieces
from the hoses.

Miele CVA 7445 Specifications

General

Product type	-
Built-in grinder	Yes
Capacity in cups	1 cups
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Milk tank capacity	0.7 L
Appliance placement	Built-in
Water tank capacity	2.7 L
Coffee beans capacity	300 g
Reservoir for brewed coffee	Cup
Cord length	2 m
Control type	Touch
Product color	Black, Stainless steel
Housing material	Stainless steel
Used capsules container capacity	17 pc(s)
Current	10 A
Connected load	1500 W
AC input voltage	220–240 V
Programmable auto power off	No

Weight and Dimensions

Depth	475 mm
Width	595 mm
Height	455 mm
Installation compartment depth	550 mm
Installation compartment width	560 mm
Installation compartment height	448 mm