Miele CVA 7445 User Manual

Frequently Asked Questions
Problem Possible cause and solution
Check water intake and
empty the water container
The plumbed-water supply is not working.
 Check whether the intake hose is kinked or the
water supply valve is not turned on completely.
 Remove and empty the water container.
 Insert the empty water container into the coffee
machine.
The following message is displayed: Please wait.
Water container is being filled. The water container fills
up.
To turn off the plumbed-water connection, fill and
insert the water container. You can then select
Settings : Water connection| Off.
F233 The cup-rim sensor is not inserted or is incorrectly
inserted.
If the main dispenser is moving upward and the cup-
rim sensor is bumped, e.g., with a cup, the cup-rim
sensor loses its reference position.
 Confirm the message withOK.
 Reinstall the cup-rim sensor.
Cup-rim detection remains inactive and the main
dispenser stays in the top position until the coffee
machine is next switched on. Cup-rim detection is
reinitialized during the next switch-on operation.
F307or Remove the milk
valve and clean it
The milk valve is faulty.
 Remove and clean the milk valve (see “Cleaning
and care – Removing and cleaning the milk valve”).
73

Miele CVA 7445 Specifications

General

Product type	-
Built-in grinder	Yes
Capacity in cups	1 cups
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Milk tank capacity	0.7 L
Appliance placement	Built-in
Water tank capacity	2.7 L
Coffee beans capacity	300 g
Reservoir for brewed coffee	Cup
Cord length	2 m
Control type	Touch
Product color	Black, Stainless steel
Housing material	Stainless steel
Used capsules container capacity	17 pc(s)
Current	10 A
Connected load	1500 W
AC input voltage	220–240 V
Programmable auto power off	No

Weight and Dimensions

Depth	475 mm
Width	595 mm
Height	455 mm
Installation compartment depth	550 mm
Installation compartment width	560 mm
Installation compartment height	448 mm