Miele DGC 7250 - Selecting a Function; Entering Numbers; Activating Mobilestart

Operating principles
22
Selecting a function
The sensor controls for the functions
are located above the display (see
“Operation” and “Settings”).
 Touch the sensor for the desired
function.
The sensor on the control panel will
light up orange.
 For functions: set values such as the
temperature.
 Under Other: scroll through the
lists until you reach the desired menu
option.
 Confirm with OK.
Changing the function
You can change to another function
during a cooking programme.
The sensor for the previously selected
function lights up orange.
 Touch the sensor for the new
function.
The new function appears in the display
with its corresponding recommended
values.
The sensor for the new function lights
up orange.
Under Other, scroll through the
lists until you reach the desired menu
option.
Entering numbers
Numbers that can be changed are
highlighted.
 Touch the or arrow sensor or
swipe to the right or left in the
area until the desired number
is highlighted.
Useful tip: If you press and hold an
arrow sensor, the numbers continue
scrolling automatically until you release
the arrow sensor.
 Confirm with OK.
The changed number is now saved.
This will take you back to the previous
menu.
Activating MobileStart
 Select the sensor to activate
MobileStart.
The sensor lights up. You can
operate your steam combination oven
remotely with the Miele App.
Directly operating the steam
combination oven takes priority over
operating it via the remote control
function on the App.
You can use MobileStart as long as
the sensor is lit up.