Miele DGC 7250 - Operation (Continued 2); Setting Cooking Durations

Operation
55
Setting cooking durations
Cooking results can be adversely
affected if there is a long delay
between the food being placed in the
oven and the start of cooking. Fresh
food can change colour and even
spoil.
When baking, the cake mixture or
dough can dry out, and the raising
agents can lose their effectiveness.
Select as short a time as possible
until the start of the cooking process.
Example: You have placed the food in
the oven compartment, selected a
function and the required settings such
as the temperature.
By entering Duration, Finish at or Start at
via the sensor, you can automatically
switch the cooking programme off, or
on and off.
- Duration
Enter the required cooking duration
for the food. The heating will switch
off automatically once this duration
has elapsed. The maximum cooking
duration that can be set depends on
the function that you have selected.
- Finish at
Specify when you want the cooking
programme to finish. The oven
heating will switch off automatically
at the time you have set.
- Start at
This function will only appear in the
menu if you have set aDuration or
Finish attime. WithStart at, you have
to specify when you want the
cooking programme to start. The
oven heating will switch on
automatically at the time you have
set.
 Select the sensor.
 Set the required times.
 Confirm with OK.
 Touch the sensor to return to the
menu of the selected function.
Changing the set cooking durations
 Select the sensor.
 Select the time.
 Confirm with OK.
 Select Change.
 Change the set time.
 Confirm with OK.
 Touch the sensor to return to the
menu of the selected function.
These settings will be deleted in the
event of a power failure.