Miele DGC 7250 - Rapid Cooling; Keeping Warm

Operation
59
Rapid cooling
Using the Rapid cooling function you can
quickly cool down food and the oven
compartment once the cooking
programme is finished.
This function is not available with the
Steam cooking operating mode.
Switching off Rapid cooling for a
cooking programme
 Select the Rapid cooling| Offsetting
before selecting the desired function.
If the Keeping warm function is also
switched on, When “Rapid cooling” is
deactivated, “Keeping warm” is also
switched off will appear.
The Rapid cooling and Keeping warm
functions are switched off. The door
remains closed at the end of the
cooking programme. The cooling fan
cools the food and the oven
compartment.
If you then want to restart a cooking
programme with the Rapid
coolingfunction, select the Rapid
cooling| Onsetting to switch the
function on again.
Keeping warm
Using the Keeping warm function you
can keep food warm after cooking
without inadvertently cooking it further.
The food is kept warm at a preset
temperature (see "Settings –
Recommended temps").
It is only possible to use the Keeping
warm function in combination with the
Rapid cooling function.
This function is not available with the
Steam cooking operating mode.
Switching on Keeping warm for a
cooking programme
 Select the Keeping warm| Onsetting
before selecting the desired function.
When the Rapid cooling function is also
switched off, “Keeping warm” requires the
“Rapid cooling” function. “Rapid cooling” will
also be activated. will appear.
 If necessary, confirm the message
with OK.
The Keeping warm and Rapid cooling
functions are switched on. Once the
cooking programme has finished, the
door opens a little automatically. The
cooling fan cools the food and the oven
compartment quickly to the preset
temperature.
Once this temperature is reached, the
door closes again automatically in order
to keep the food warm.
If you then want to restart a cooking
programme without the Keeping
warmfunction, select the Keeping
warm| Offsetting to switch the
function off again.
The setting for the Rapid cooling
function remains unchanged.