Cleaning and care
95
Lift the middle pane up gently and
pull it out.
Clean the door panes and other
individual parts with a clean sponge
and a solution of hot water and
washing-up liquid or a clean, damp
microfibre cloth.
Dry all parts with a soft cloth.
Then reassemble the door carefully.
Refit the middle pane in such a way
that the material number is legible
(not reversed).
Push the inner pane with the matt
printed side facing downwards into
the plastic strip and place it between
the retainers.
Use a flat-head screwdriver to flip the
two glass pane retainers inwards.
The door is now reassembled.
To Next Page
Loading...
