Problem solving guide
60
Message Cause and remedy
lights up red in the
display and an alarm
also sounds.
The temperature alarm has been activated (see
“Temperature and door alarm”). The temperature in
the freezer has risen higher or fallen lower than the
temperature set.
This could be due to, for example:
– the appliance door being opened too often, or
being left open.
– a large quantity of fresh food being placed in the
freezer at once without switching on the Super
freeze function.
– an interruption to the power supply.
– a fault with the appliance.
Touch
in the display.
The alarm message is confirmed:
goes out and
the alarm stops.
The start screen appears in the display: the warmest
temperature recorded in the freezer will flash for about
1minute in the display. Then the temperature display
will change to the current temperature in the freezer.
You can exit from the flashing temperature display
early:
Touch the temperature display.
The warmest temperature displayed will disappear.
The display will then revert to showing the current
temperature in the freezer.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, it should
be used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
To Next Page
Loading...
