Miele FNS 28463 E bb - Page 62

Problem solving guide
62
Message Cause and remedy
lights up red in the
display, a fault code F
with numbers appears
and an alarm also
sounds.
There is a fault.
An appliance fault always has priority over any
settings which have just been selected. An appliance
fault has priority over any current door and/or
temperature alarms displayed.
 To switch the alarm off touch in the display.
 Call Service.
To report the fault you need the fault code and also
the model number and serial number of your
appliance. You can access these in the display.
 To do this touch in the display.
The appliance data required will be shown in the
display.
 Confirm withOK.
In an emergency the appliance can be switched off
directly by the fault display.
 Touch .
lights up yellow in
the display and an
alarm also sounds.
The water supply is turned off.
 Open the water supply.
The ice cube drawer is not in the appliance. An alarm
sounds after closing the door
 Touch in the display.
The alarm message is confirmed and the warning
tone stops.
The current temperature will appear in the display
again.
 Replace the drawer correctly or switch the ice
cube maker off.