Miele FNS 28463 E bb - Page 85

Installing in a side-by-side combination
85
 Place connecting bracket with the
horizontal long slots on the left-hand
side and secure them as follows:
1. Secure it loosely in position with two
screws .
2. Adjust the connecting bracket  until
its centre piece abuts against the
side of the second appliance.
3. Secure the connecting bracket
using screws.
4. Now tighten the loose screws and as
you do so push the right-hand
appliance up against the left-hand
appliance.
Installation steps from the back of
the appliances
 Place connecting bracket with the
horizontal long slot on the left-hand
side and secure it as follows:
1. Secure it loosely with screw.
2. Adjust the connecting bracket  until
its centre piece abuts against the
side of the second appliance.
3. Secure the connecting bracket
using screw.
4. Now tighten the loose screw and as
you do so push the right-hand
appliance up against the left-hand
appliance.