Miele G 7882 - Cleaning and care; Cleaning spray arms

^
Press ß or hold pressed in, until the
required value appears in the display.
Final rinse temperature:
^
Turn the programme selector to the
STOP position f.
^
Press 0 as often as necessary or
hold it pressed in until "E25" (pro
-
gramming level 25 = Final rinse 2)
appears in the display. Then:
^
Turn the programme selector back to
the programme which needs to be
changed. The actual value appears
in the display field after °C.
^ Press ß or hold pressed in, until the
required value appears in the display.
Note:
When using the "vario TD" programme
observe the requirements relating to the
appropriate infection prophylaxis.
Final rinse temperature holding time:
^ Turn the programme selector to the
STOP position f.
^
Press 0 as often as necessary or
hold it pressed in until "E26" (pro
-
gramming level 26 = Final rinse 2)
appears in the display. Then:
^
Turn the programme selector back to
the programme which needs to be
changed. The actual value appears
in the display field after min.
^
Press ß or hold pressed in, until the
required value appears in the display.
Having changed a value or all values:
^
Press the 6 button. SP appears.
^
Press 6 again. The change has
been recorded.
Programming special functions
44