Miele G600 - Water Inlet (Diverter) - Removal; Water Inlet - Removal

Technical Information
G600 & G800 Electronic Dishwashers
5.26 Water Inlet (Diverter) - Removal
1. Open the Door.
2. Unscrew the connections securing the Water Intake to the inside of
the cabinet; as shown in Figure 5-25.
Figure 5-25: Water Inlet - Removal
3. Remove the Right Side Panel (5.3).
Service Tip
Be prepared as residual water remains in the Water Intake. Water will
flow from the Water Intake upon disconnecting the hoses.
4. Disconnect all Connection Hoses.
5. Remove the Water Inlet.
78