Miele H6860BP - Catalyser; Showroom Programme; Demo Mode; Factory Default Settings

Settings
48
Catalyser
The level of odour reduction is
represented by a bar with seven
segments.

Maximum odour reduction is selected
when all segments are filled. If none of
the segments is filled, the catalyser is
switched off.
 Select Minimum or Maximum to change
the level of odour reduction.
 Select On or Off to turn the catalyser
on and off.
Showroom programme
This function enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for
domestic use.
Demo mode
If you switch the oven on whilst it is in
Demo mode, the following message
will appear in the display: Demo mode
is switched on. The appliance will not heat
up.
– On
Touch OK for at least 4seconds to
activate Demo mode.
– Off
Touch OK for at least 4seconds to
deactivate Demo mode. The oven
can then be used as normal.
Factory default settings
– Settings
Any settings that you have altered will
be reset to the factory default setting.
– User programmes
All User programmes will be deleted.
– Recommended temperatures
Recommended temperatures which
have been changed will be reset to
the factory default settings.
– MyMiele
All MyMiele entries will be deleted.