Using the oven - further functions
64
Switching on and off automatically
We recommend using automatic
switching on and off when roasting.
However, do not delay the start for too
long when baking as the cake mixture
or dough will dry out, and the raising
agents will lose their effectiveness.
To switch a cooking programme on and
off automatically, you have a choice of
how to enter the time parameters:
– Duration and Finish at
– Duration and Start at
– Finish at and Start at
Example: It is 11:30. The food takes
30minutes to cook and should be
ready at 12:30.
Select Change.
Select Open further settings.
Set a duration of 00:30 h in the
Duration field.
Set a time of 12:30 in the Finish at
field.
Confirm with OK.
The Start at time will be calculated
automatically. Start at12:00 will appear
in the display.
The oven will switch on automatically
when this time is reached.
Sequence of a programme that
switches on and off automatically
Up until the start time the function, the
selected temperature, Start at and the
start time will appear in the display.
After the programme has started, you
can follow the heating-up phase in the
display until the required temperature
has been reached.
Once this temperature is reached, a
buzzer will sound if this option has been
switched on (see "Settings - Volume -
Buzzer tones").
After the heating-up phase, the time
remaining will appear in the display.
You can follow the time counting down
in the display. The last minute counts
down in seconds.
At the end of the programme a buzzer
will sound if this option has been
switched on (see "Settings - Volume -
Buzzer tones").
The oven heating and lighting will
switch off. Process finished will appear in
the display.
You have the option of saving the
programme as a User programme (see
"User programmes") or increasing the
duration of the programme via Change.
During the cooling down phase the
cooling fan will continue to run for a
while.
To Next Page
Loading...
