Roasting
99
Using the food probe
Remove the food probe from its
holder in the door.
Insert the metal tip of the food probe
fully into the food. Make sure that the
handle is angled upwards.
Place the food in the oven.
Close the door.
Select the oven function or Automatic
programme.
The message Continue cooking with the
food probe? will appear.
Select Yes.
Change the recommended
temperature if necessary.
Change the recommended core
temperature if necessary.
The core temperatures cannot be
changed for the Automatic
programmes.
You can also start the process at a later
time. Select Open further settings and set
a time in the Start at field. With
Automatic programmes, select Start
later.
You can estimate approximately when
the food will be ready as the duration of
the cooking programme is about the
same as if you were cooking food
without using the food probe.
You cannot enter a Duration or Finish at
time, as the total cooking duration is
determined by how long it takes for the
core temperature to be reached.
To Next Page
