Programme settings
106
Drying assistance
The additional “Drying assistance” (drying) function accelerates the
drying process at the end of the programme.
When the drying assistance function is activated the Comfort door
lock opens the door a little at the end of the programme, allowing
steam to escape from the wash cabinet. The load items dry passively
from the residual warmth in the wash cabinet.
Wash cabinet
cooldown phase
A cooldown pause follows the wash phase. During this pause, water
vapour is extracted from the wash cabinet and condensed by the
steam condenser. This reduces the moisture level in the wash
cabinet, which promotes drying. In addition, this cools the wash
cabinet slightly.
...
Cabinet cooling down time
Cabinet cooling time
0
(0 - 30
Min
Min
)
The setting value is entered in increments of 1minute. The possible
range is shown in the bottom line of the display.
Use the arrow buttons (higher) and (lower) to set the cooling
down duration.
Press OK to save the setting.
Drying time
After the cooldown time, the Comfort door lock opens the door
slightly to allow the moisture and heat remaining in the wash cabinet
to dissipate. At this point, the door is unlocked and can be opened at
any time. After the drying time elapses, the message Programme
finished appears on the display. Opening the door before the drying
time elapses ends the programme prematurely.
...
Drying time
Drying time
0
(0 - 30
Min
Min
)
The setting value is entered in increments of 1minute. The possible
range is shown in the bottom line of the display.
Use the arrow buttons (higher) and (lower) to set the drying
duration.
Press OK to save the setting.
To Next Page
Loading...
