Maintenance
117
Check powder agent dispenser
If your washer-disinfector has a dispenser in the door for powder
cleaning agent , please note the following:
If powder cleaning agent is used, the temperature at the time of
dispensing must be checked every 14 days.
The dispensing temperature is defined in the validation protocol
during validation.
For the test, the temperature must be read off from the display during
a programme sequence at the point when the flap can be heard
opening. It must then be documented and compared with the
temperature in the validation protocol.
If the recorded dispensing temperature deviates by more than
+/-2°C from the temperature given in the validation protocol, the
Miele Customer Service Department must be notified.
To Next Page
Loading...
