Settings
73
Drying (drying assistance)
The drying function can be preset or deactivated for all programmes
with a drying phase (see Programme charts).
The additional “Drying assistance” (drying) function accelerates the
drying process at the end of the programme.
When the drying assistance function is activated the Comfort door
lock opens the door a little at the end of the programme, allowing
steam to escape from the wash cabinet. The load items dry passively
from the residual warmth in the wash cabinet.
Drying results should be checked at the end of the programme.
Instruments with visible residual moisture must be dried again
separately, e.g. with sterile compressed air.
Open the menu as follows:
button
Settings
Drying
- No
The drying function is automatically deactivated for all
programmes.
- Yes
The drying function is activated for all programmes. The
programme duration is lengthened if the drying function is
activated.
Select an option using the and arrow buttons.
Press OK to save the setting.
To Next Page
Loading...
Need help?
General
